brcdIp.18.104.22.168.1.1.6 The snAgentCpu table was created because switch families evolved from a single-CPU system to a multi-CPU system and CPU utilization information to non-management CPUs is required. brcdIp.22.214.171.124.1.1.4 snAgentCpuUtilPercent NOTE Execute cpu-usage on command in the config mode, if MP CPU utilization is needed on the Brocade NetIron devices.This object is supported on the Brocade NetIron MLX Series, The data it displays is from the last time that this object was read. MIB object OID snAgGblCpuUtilData brcdIp.126.96.36.199.35 The object in this group can display management module CPU utilization. his comment is here
NOTE The objects in Group B have been obsoleted on the Brocade NetIron XMR Series and Brocade NetIron MLX Series devices. If there is more than one management station reading the object, conflict occurs because every read resets the CPU utilization until the next read. Group A consists of the following object and it is not to be used. Previous Topic: Agent Groups Hide navigationPrevious topicNext topicToggle HighlightingPrintPrint AllEmail UsContentsIndexGlossarySearchNo search has been performed.
These three objects are time-based. Group C consists of the snAgentCpu table. MIB object OID snAgGblCpuUtil1SecAvg brcdIp.188.8.131.52.50 snAgGblCpuUtil5SecAvg brcdIp.184.108.40.206.51 snAgGblCpuUtil1MinAvg brcdIp.220.127.116.11.52 Group B was created to resolve the multi-management stations issue of snAgGblCpuUtilData. MIB object OID snAgentCpu brcdIp.18.104.22.168 snAgentCpuUtilTable brcdIp.22.214.171.124.1 snAgentCpuUtilEntry brcdIp.126.96.36.199.1.1 snAgentCpuUtilSlotNum brcdIp.188.8.131.52.1.1.1 snAgentCpuUtilCpuId brcdIp.184.108.40.206.1.1.2 snAgentCpuUtilInterval brcdIp.220.127.116.11.1.1.3 snAgentCpuUtilValue NOTE This object is deprecated for Brocade FastIron SX devices and it is not supported
It is recommended that this object not to be used. Usage notes on CPU utilization and system CPU utility table There are three groups of CPU utilization MIB objects. However, they only work for the management CPU utilization. https://thwack.solarwinds.com/thread/32331 Use snAgentCpuUtilTable if supported on a device instead of snAgGblCpuUtil1SecAvg, snAgGblCpuUtil5SecAvg, and snAgGblCpuUtil1MinAvg.
Use snAgentCpuUtilTable on the Brocade NetIron XMR Series and Brocade NetIron MLX Series devices. Linux Snmp Mib